The CP series SCR power controllers are multi-zone power controllers that can be configured for phase angle fired, zero voltage switched or on-off solid state contactor control of directly connected electric heaters. The CP will not control transformers or motors. This is accomplished by phase angle firing, or variable time based zero voltage switching a pair of inversely connected SCR's. Up to eight zones available on a single chassis. Single phase and three phase options.
Unit of Measure
1
Item # |
Item Name |
Voltage Designations |
Load |
Output Voltage |
Control Signal |
|---|---|---|---|---|---|
| 4CP-48-30 | N/A 4CP-48-30, 4 Zone CP Series SCR Power Controller | N/A 480 VAC 50/60 Hz | N/A 30 AMPS | N/A 0 to 97% of Input Voltage Phase Angle | N/A 4 to 20 mA at 1.5 volts DC per zone |
| 4CP-48-40 | N/A 4CP-48-40, 4 Zone CP Series SCR Power Controller | N/A 480 VAC 50/60 Hz | N/A 40 AMPS | N/A 0 to 97% of Input Voltage Phase Angle | N/A 4 to 20 mA at 1.5 volts DC per zone |
| 4CP-48-70 | N/A 4CP-48-70, 4 Zone CP Series SCR Power Controller | N/A 480 VAC 50/60 Hz | N/A 70 AMPS | N/A 0 to 97% of Input Voltage Phase Angle | N/A 4 to 20 mA at 1.5 volts DC per zone |
Unit of Measure
1
