The MAI-MAP interface module is designed to convert a variety of input signal types (including 0-20mA, DC voltage, 135 ohm thermostat and 100-1000 ohm
potentiometer) to a 0-20mA (4-20mA, potentiometer input) signal capable of driving up to 1000 ohms (20V max. output). The MAI/MAP may be used as a voltage amplifier for driving multiple power controls. The MAP interface comes standard with a 500 ohm potentiometer w/ two feet of wire, 0-100% dial and knob for panel mounting.
Unit of Measure
Specifications
Input Signal |
N/A 0 to 5 V0 to10 V |
Output Signal |
N/A 0 to 20 mA |
Output Impedance |
N/A 1000 ohms |
Indicators |
N/A Green LED (Power “ON”, verify output connection) Yellow LED (4 to 20 mA output) |
Regulation |
N/A Zener Voltage Regulated |
Power Requirement |
N/A 5 W |
Weight |
N/A 1 lb |
Warranty |
N/A 3 y |
